I. Applications:
GL026 series computer-controlled fabric tensile tester is used to tensile, tearing, bursting, breaking elongation, elasticity, seam slippage, peel and other tests of various textiles. Computerized or stand alone controllers are selected to match expectations for test setup, data capture, monitoring, analysis and test reporting. The tester can do tensile testing, break strength testing at a certain elongation, elongation test at a certain load, can be tested and provide data in accordance with GB, ISO, DIN, ASTM, JIS and other international standards.
II. Features:
1. This product uses high-intensity light beams fixed on the work surface, so that they constitute a highly rigid door frame structure.
2. Driven by Japan Panasonic servo motor with speed ratio up to 10,000 times, servo motor drives the beam moves up and down 0.05-1000mm/min steplessly adjustable through the transmission mechanism, double space test loading process.
3. The main machine adopts advanced DSP + MCU digital closed-loop control system for control and measurement, using computer testing process and test curves of dynamic display and data processing, after the end of the trial by the graphics processing module for data re-amplification of the curve analysis editing, product performance reached the international advanced level.
4. Safety emergency stop function, limit protection function, overload and over-current protection.
5. English computer test software operation control, print test report interface.
6. Dual Column Load frame with extra height and width options available.
7. Wide range of load cells serve a variety of applications.
8. Load accuracy +/- 0.5% of indicated load within load cell rated force range.
9. Data acquisition rate on load, extension, and strain channels.
10. Extra load frame height and /or width for special applications.
11. Wide range of compatible optional accessories including tensile grips, compression and bend fixtures, environmental chambers, extensometers, etc.
12. 12 months warranty and customer support services.
III. Main technical parameters:
Item |
Dual Columns Fabric Tensile Tester |
Mode |
GL6102/GL6202/GL6502/GL6103/GL6203/GL6503/GL6104 |
Capacity |
100N/200N/500N/1kN/2kN/5kN/10kN |
Accuracy |
Class 0.5 |
Load range |
0.4%~100%FS |
Load measurement accuracy |
within ±0.5 of reading |
Load resolution |
±1/300000 of Max. capacity, stepless, full range |
Long travel extensometer measurement range |
10~800mm |
Long travel extensometer measurement accuracy |
within ±1% of reading |
Long travel extensometer measurement resolution |
0.008mm |
Displacement measurement accuracy |
within ±0.2% of reading |
Displacement measurement resolution |
0.025μm |
Loading speed range |
0.005~5%FS/s |
Loading speed accuracy |
Speed<0.05%FS/s,within ±2% of set value, speed≥0.05%FS/s, witin ±0.5%of set value |
Extension speed range |
0.005~5%FS/s |
Extension speed accuracy |
Speed<0.05%FS/s,within ±2% of set value, speed≥0.05%FS/s, witin ±0.5%of set value |
Crosshead speed range |
0.001~500mm/min |
Crosshead speed accuracy |
within ±0.2% of set value, |
Constant load,strain,displacement control range |
0.5%~100%FS |
Constant load,strain,displacement control accuracy |
Set value≥10%FS,within±0.5% of set value, set value<10%FS, within ±1% of set value |
Frame dimension |
694X578X1911mm |
Max tensile space |
840 |
Max compression space |
1000mm |
Effective test space |
395mm |
Voltage |
220V/50Hz,±10% |
Weight |
250Kg |
Controller |
Full digital close-loop measurement system |
Motor |
Import AC servo motor |
Load cell |
America import load cell |
Manual controller |
One set |
Computer |
Lenovo brand business computer |
Printer |
HP brand inkjet printer |